|
|
| |
 |
| |
35mm
Slide Imaging
 SmartLoader™
<<
back
| Download
PDF
Automated, High Volume Multi-Canister 35mm
Film Loader
What's "smart" about the SmartLoader?
"Smart" is not having to buy expensive
bulk film loading equipment, or fumbling around
with changing bags, or being closed up in
a dark room loading roll after roll of bulk
film. "Smart" is being able to drop
in seven canisters of standard 35mm film,
push the start button, and image up to 252
high-quality exposures automatically. "Smart"
is quick and convenient at-a-glance camera
information without constant monitoring for
in-progress status and diagnostics. "Smart"
is using the SmartLoader for fast and convenient,
high-quality volume imaging.
The SmartLoader from Lasergraphics - It's
the smart choice.
High
Quality Volume Output
-
Exposes up to 252 slides or negatives without
operator intervention.
- Custom-designed
fully coated optics for optimum performance.
- Camera
lens is computer focused for optimum image
clarity.
- Consistent
high quality output.
Ease
Of Use
-
Easy to install and operate.
- Holds
up to seven rolls of 12, 24, or 36-exposure
standard 35mm film canisters.
- Automatically
loads, exposes, rewinds, and ejects each
film canister for unattended operation.
- Early
rewind capability.
- Sixteen-character
camera display provides status information
for efficient project planning.
- Custom
film look-up tables for various Kodak and
Fuji films.
- Camera
retains valid status information with power
off or when disconnected from film recorder.
- Can
utilize "pin-registered" mounts.
Compatibility
-
The SmartLoader is compatible with the following
Lasergraphics LFR digital film recorders:
LFR Mark II and Mark III (DPM), standard
LFR Mark II, Mark III and LFR-X95.
Technical
Specifications
-
Standard film canister size: 12/24/36 exposures.
- Film
canister must conform to ANSI PH1.14:1993
(The vast majority of 35mm canisters conform
to this standard).
- Canister
load time (from empty) 70 seconds.
- Canister
unload time (from last exposure) 30 seconds.
- Power
Requirements: 90-250V ~50/60Hz. 2A
- Environmental
Characteristics: Temperature: 15°C to
30°C.
- Humidity:
15% to 85% relative humidity non-condensing.
- Physical
Parameters: 18" H (when attached to
a Lasergraphics film recorder, including
canister
- Power)
x 8" D x 23" W, 27 lbs. (45.72
cm x 20.32 cm x 58.42 cm, 12.25 kg.).
Warranty
-
One year parts and labor. Extended warranty
available.
<<
back | top
|
| |
|
|
|
|
|
|
|
|
|
|
